December 6, 2025

Holy C? Holy see‑ya, duopoly!

Divine D native Linux open-source mobile system – Rev. 1.1 Hardware Architecture

Faster storage, 8K video, off‑grid chats — fans yell “finally” while skeptics squint

TLDR: Divine D Rev 1.1 adds faster storage, 8K video out, off‑grid messaging, and smarter power—aimed at user freedom. Comments split between cheering a duopoly escape, demanding proof it’s real, and dreaming of fully modular phones, with tech nitpicks keeping the flame wars lively.

Divine D just dropped its Rev 1.1 hardware update, and the crowd is acting like someone cracked open their phones with a crowbar. The big upgrades: a super‑fast memory card slot (microSD Express), an HDMI port that can push 8K video, a low‑power long‑range radio called LoRa for off‑grid messaging, smarter battery/power controls, and a proper vibration motor. Translation: more speed, more screens, more freedom. The vibe under the official post is pure rebellion. One top comment basically screams, “break the Google/Apple duoculture,” with celebratory profanity for spice. Another voice asks the buzzkill question: is this real and who’s actually building it? That skeptical energy mixes with a hilarious side‑quest where someone went searching for ties to “Holy C,” the esoteric language, and came back empty‑handed. Nerd drama also flares over the M.2 slot key (B vs. NVMe), proving even utopia has standards debates. Meanwhile, dreamers pitch a future where phones are like LEGO PCs—buy parts, snap them in, ditch any vendor that tries to lock you down. The community mood swings between “finally, freedom!” and “show me the receipts.” If Rev 1.1 delivers even half the promise, the duopoly’s days might feel numbered—at least in the comments.

Key Points

  • Rev. 1.1 deprecates SecondPCB, merging its features into mainPCB to streamline hardware design.
  • microSD Express via PCIe 2.0 Gen 2 x1 enables up to 500 MB/s and higher IOPS than legacy microSD/eMMC 5.1.
  • Hardware supports multiplexing between SDMMC and microSD Express; OS manages an external de/multiplexer due to RK3588S limitations.
  • A micro HDMI connector adds external display output up to 7680×4320 (8K) at 60 Hz.
  • New load switches and an I²C-connected haptic engine improve power management and user feedback capabilities.

Hottest takes

“Fuck, yes. Yes, fuck… break the duoculture” — A4ET8a8uTh0_v2
“Is this even real? Who’s behind it?” — mrintegrity
“Imagine a phone you can just swap and mix components” — cy6erlion
Made with <3 by @siedrix and @shesho from CDMX. Powered by Forge&Hive.